RECOMMENDED CAMERA SETTINGS/F (CYCLES
PER FRAME)
FOR DUO DIGITAL FRAMELINER
AATON ALL
MODELS 100/F
ARRIFLEX ALL
MODELS 200/F
EXCEPT
16 HIGH SPEED 50/F
MOVIECAM ALL
MODELS 200/F
PANAVISION R200
200/F
G/GII
200F
PLATINUM
100/F
STAR
100/F UNDER 50 F.P.S.
50/F OVER 50
F.P.S.
STAR
II 250/F
Incorrect cycle per frame settings on selected cameras will
cause incorrect camera readings on the monitor data display box.
Cycles per frame settings are to camera manufacturers
factory specifications. However, after
market camera modifications may effect tachometer (cycles per frame)
output. Therefore, if a questionable
reading appears on the screen, refer to the formula and examples below to
reprogram the correct cycles per frame setting.
If no readings appear in either the footage counter or tachometer data
box, the tachometer output has been removed or reassigned to a different pin.
(incorrect reading that is
currently displayed in the data box FPS)
incorrect FPS x /F (cycles per frame) = correct setting
24 fps
incorrect FPS = current on screen data box
display with camera running
24 fps = known frame rate of cameras running speed
/F = current setting on Duos cycles per frame setting.
Ex. 1 12
fps (data box reads) 50/F
= 100/F (correct setting)
24
fps
Ex. 2 6 fps (data box reads) 50/F = 200/F (correct setting)
24
fps